AVR - Automatic Voltage Regulator SE350
The AVR SE350 is an encapsulated electronic voltage regulator designed for Marathon and Stamford alternators, which controls the output of brushless AC generators by regulating the exciter current. It is powered by an input of AC190-240V to 50/60Hz and offers a continuous output of 255W to 73 V CC DC (3.5 A), with a forcing capability of 525W to 105 V CC DC (5 A) at 240 V CA input. Its regulation is 1.00% (or better at 1% depending on the set rate) and it allows remote voltage adjustment of up to +/-10% with a 2000 -ohm rheostat or +/-5% with a 1000 -ohm one. In addition, it includes adjustable frequency compensation with "roll-off" points of 54-45- for 61Hz and 60Hz51Hz for 50Hz. Weighing 6.5 oz with dimensions of 100x65x49mm, its maximum power dissipation is 8 watts, making it a compact and efficient component.
AVR - SE350 belongs to the generator excitation circuit and holds the output voltage within about ±1 % when the load steps up or down.
AVR wear is thermal. It works inside the generator compartment with no ventilation of its own, so it is usually the first module to age on a high-hour set. Keeping one on the shelf avoids a multi-day stop for a low-cost part.
Specifications and compatibility
- Applicable to
- MARATHON ELECTRIC
- Dimensions
- 17 x 6 x 13 cm
- Weight
- 1.00 kg
How to verify before ordering
- Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
- Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
- Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.
Frequently asked questions
How do I know the fault is the AVR and not the generator?
Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.
Can the voltage be trimmed after installation?
Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.
Related parts
- AVR - Automatic Voltage Regulator AVC125-10
- AVR - Automatic Voltage Regulator GAVR-35A
- AVR - Automatic Voltage Regulator R726
- AVR - Automatic Voltage Regulator 314-7755
- AVR - Automatic Voltage Regulator R448
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Model | SE350 |
| Applicable To | MARATHON ELECTRIC |
| Weight | 1,00 kg |
| Dimensions | 17 x 6 x 13 cm |
| Spare Parts | |
|---|---|
| Generator Parts | AVR |
