Rectifier bridge - Universal rectifier bridge M50100TB1600
The M50100TB1600 rectifier diode, is a robust three-phase bridge designed to handle an average current of 100 A. It stands out for its ability to withstand a maximum non-repetitive surge current of 1500 A and a maximum repetitive voltage of 1600 V. Operates efficiently over a wide temperature range from -40°C to 125°C, with a forward voltage of 1.2 V and a junction-to-case thermal resistance of 0.3 °C/W. This 5 -pin component is designed for surface mounting, ensuring reliable and durable three-phase current conversion.
Universal bridge rectifier M50100TB1600 is an electrical component of the panel or control circuit: it conducts, switches, protects or signals inside the system.
In electrical work 90 % of faults sit in the joint, not in the part. A loose terminal, a bad crimp or chafed insulation produce intermittent faults that no new component will cure.
Specifications and compatibility
- Amperage
- 100 A
- Dimensions
- 8,5 x 5,5 x 9 cm
- Weight
- 0.50 kg
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- Rectifier bridge - Universal rectifier bridge SQL40A 1200V
- Rectifier bridge - Universal rectifier bridge MDS150/16
- Rectifier bridge - Black Rectifier Bridge Kit 330-25777A
- Rectifier bridge - Rectifier Kit RSK6001
- Rectifier bridge - Rectifier Kit RSK5001
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Model | M50100TB1600 |
| Amperage (A) | 100 A |
| Weight | 0,50 kg |
| Dimensions | 8500*5500*9000 mm |
| Spare Parts | |
|---|---|
| Generator Parts | Rectifier bridge assembly |
