Rectifier kit LSA46.1 is an auxiliary electrical part: part of the set wiring, protection or indication.
Before replacing, measure continuity and voltage under load. A terminal that shows continuity at no load can drop completely once current flows, and that is the case that wastes the most time.
Specifications and compatibility
- Dimensions
- 15 x 6,5 x 15 cm
- Weight
- 2.00 kg
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- Rectifier bridge - Rectifier Kit ZX40-12 Diode Rectifier Bridge
- Rectifier bridge - Leroy-Somer diode bridge LSA49.1
- Lighting - Public Lighting Street Lights (Cobra Type)
- Lighting - LED pilot light yellow AD16-22D/S 220 VOL
- Lighting - LED pilot light yellow AD16-22D/S 6.3 VOL
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Model | LSA46.1 |
| Weight | 2,00 kg |
| Dimensions | 15 x 6,5 x 15 cm |
| Spare Parts | |
|---|---|
| Generator Parts | Rectifier assembly |
