Rectifier bridge - Universal rectifier bridge MDS100-12
The MDS 100-12 is a three-phase rectifier bridge module designed for high-current applications. This robust component withstands a maximum reverse voltage of 1.2kV and a conductive current of 100A, with a maximum surge current capacity of 1.2kA. Its screw-terminal module design makes both electrical and mechanical mounting easy, ensuring a secure connection. In addition, it features a maximum conducting current of 1.3V and has M6 screws at its output for a simple and reliable connection.
Universal bridge rectifier MDS100-12 is an auxiliary electrical part: part of the set wiring, protection or indication.
Before replacing, measure continuity and voltage under load. A terminal that shows continuity at no load can drop completely once current flows, and that is the case that wastes the most time.
Specifications and compatibility
- Amperage
- 100 A
- Dimensions
- 8,5 x 5,5 x 9 cm
- Weight
- 0.50 kg
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- Rectifier bridge - Universal rectifier bridge M50100THC1600
- Rectifier bridge - Universal rectifier bridge MDS60-12/16
- Rectifier bridge - Universal rectifier bridge M50100THA1600
- Rectifier bridge - Universal rectifier bridge SQL100A 1600V
- Rectifier bridge - Universal rectifier bridge KBPC50-10
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Model | MDS100-12 |
| Amperage (A) | 100 A |
| Weight | 0,50 kg |
| Dimensions | 8500*5500*9000 mm |
| Spare Parts | |
|---|---|
| Generator Parts | Rectifier bridge assembly |
