Skip to Content

AVR - Automatic Voltage Regulator UVR6

https://www.bochipower.cc/web/image/product.template/956/image_1920?unique=9b4d277
(0 review)
The AVR UVR6 is an analogue automatic voltage regulator, a standard component in Mecc Alte AC alternators. Built with technology similar to the SR7, this compact AVR is compatible with single-phase and three-phase generators operating at 50 or 60 Hz. Offers voltage regulation of ±1.0% (with 4% engine governing) and features overload protection (with delay for better acceptance during engine starting) and low-speed protection, both with adjustable parameters and LED indicators that light up when they intervene. Its key specifications include a voltage sensing input of 220-480 V CA, a power input of 50-280 V CA and a maximum output of 63 V CC with a continuous current of 6A (7A intermittent for 10 seconds) and a minimum resistance of 10 Ω. It is a brushless AVR, ideal for ensuring reliable and safe control.

$ 211.60 211.6 USD Tax Excluded

211.60 Bs Tax Excluded

  • Model
  • Generator Parts
  • Applicable To
  • Weight
  • Dimensions

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

AVR - UVR6 is the automatic voltage regulator of the generator: it reads the output voltage and corrects the field excitation so the voltage stays stable as the load changes.

A failing AVR shows up before it dies: voltage dips 5–30 V when a large motor starts, lights flicker, or the control panel reboots. When it fails completely the set delivers only residual voltage or trips on overvoltage.

Specifications and compatibility

Applicable to
MECC ALTE
Dimensions
17 x 6 x 13 cm
Weight
2.00 kg

How to verify before ordering

  • Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
  • Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
  • Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.

Frequently asked questions

How do I know the fault is the AVR and not the generator?

Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.

Can the voltage be trimmed after installation?

Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Model UVR6
Applicable To MECC ALTE
Weight 2,00 kg
Dimensions 17 x 6 x 13 cm
Spare Parts
Generator Parts AVR