Generator controller - MEBAY ATS420ANJ
Mebay automatic ATS generator controller ATS420 dual power supply switch controller
The controller is a dual-power switching ATS controller, an intelligent dual-power switch module with programmable functions, automatic measurement, automatic control and an LCD display. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
Mebay ATS420ANJ ATS Controller switches the load between mains and generator: it monitors the mains, commands the start, transfers, and re-transfers with a delay so the set is not shocked.
In contactor-based ATS the wear is in the main contacts and the mechanical interlock. In motorised-breaker ATS it is the charging motor and the limit switches. Knowing which one your panel uses tells you what to keep in stock.
Specifications and compatibility
- Brand
- MEBAY
- Model
- ATS 420 ANJ
- Dimensions
- 225 x 130 x 80 mm
- Weight
- 0.40 kg
How to verify before ordering
- Match the number of poles, the rated current and the switching type (contactor or motorised breaker).
- Check the ATS control voltage: 110 V, 220 V or 24 V depending on the panel it goes into.
- Confirm whether neutral is switched. On installations with a distributed neutral this is mandatory.
- The reference shown on this listing is ATS 420 ANJ; cross-check it against the one stamped on the removed part.
Frequently asked questions
The set starts but the load is not transferred. What do I check?
The signal first: mains-sensing relay, control fuse and the wiring between ATS and set. Then the interlock: if the mains contactor does not release, the generator contactor will not close, by design.
Can I fit an ATS of another brand?
Yes, as long as control voltage and logic are compatible with the set panel. With a controller-based set, the ATS must accept that controller transfer signal.
Related parts
- Generator controller - MEBAY ATS320AC
- Generator controller - MEBAY ATS220
- Transfer switch - Spare board ATS 4 RELE/110V
- Transfer switch - Automatic transfer ATS BCQ2I-630/630A 110V/4P
- Transfer switch - Automatic transfer ATS BCQ2I-400/400A 110V/4P
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Brand | MEBAY |
| Model | ATS 420 ANJ |
| Dimensions | 225 x 130 x 80 mm |
| Weight | 0,40 kg |
