Skip to Content

AVR - Automatic Voltage Regulator M16FA655A

https://www.bochipower.cc/web/image/product.template/942/image_1920?unique=9b4d277
(0 review)
The Marelli Motori M16F655A "MARK V" Voltage Regulator is a robust and highly reliable solution, designed specifically for synchronous generators, especially Marelli Motori generators of the MJB M8B-160and 250 160-200 series, suitable for machines from 10 up to 2000 kVA. This regulator is fully encapsulated, which allows it to maintain exceptional reliability even in severe environmental conditions such as high humidity, dust, salt-laden atmospheres and high vibration levels. It is compatible with single-phase and three-phase operation. In addition, it incorporates an internal electromagnetic interference filter that ensures compliance with the relevant EMC standards, guaranteeing optimum performance from your generator.

$ 101.15 101.15 USD Tax Excluded

101.15 Bs Tax Excluded

  • Model
  • Generator Parts
  • Applicable To
  • Weight
  • Dimensions

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

AVR - M16F655A is the automatic voltage regulator of the generator: it reads the output voltage and corrects the field excitation so the voltage stays stable as the load changes.

A failing AVR shows up before it dies: voltage dips 5–30 V when a large motor starts, lights flicker, or the control panel reboots. When it fails completely the set delivers only residual voltage or trips on overvoltage.

Specifications and compatibility

Applicable to
MARELLI MOTORI
Dimensions
17 x 6,5 x 13 cm
Weight
2.00 kg

How to verify before ordering

  • Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
  • Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
  • Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.

Frequently asked questions

How do I know the fault is the AVR and not the generator?

Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.

Can the voltage be trimmed after installation?

Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Model M16FA655A
Applicable To MARELLI MOTORI
Weight 2,00 kg
Dimensions 17 x 6,5 x 13 cm
Spare Parts
Generator Parts AVR