Skip to Content

Generator controller - DSE 501KSTM8

https://www.bochipower.cc/web/image/product.template/1009/image_1920?unique=9b4d277
(0 review)
DSE generator controller Key-start manual DSE501K 501K for the engine control module
The DSE Genset controller DSE501K model is a manual engine control module
The DSE Genset DSE501K controller is used to start and stop the engine, indicating fault conditions; automatically shutting down the engine and indicating the engine fault via an LED that gives a true first-start fault annunciation.
DSE DSE501K Generator Controller Operation of any of the following alarms; low oil pressure, high engine temperature, auxiliary shutdown, overspeed (optional), will de-energise the running relay. A charge-failure warning is also provided by monitoring the WL terminal on the charging alternator

$ 107.24 107.24 USD Tax Excluded

107.24 Bs Tax Excluded

  • Model
  • Brand
  • Dimensions
  • Weight

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Controller DSE 501KSTM8 is the unit that automates the set: it decides when to start, when to transfer load, when to alarm and when to shut down for protection.

Download the alarm history before replacing the module. Many "controller faults" are really a sensor or an emergency-stop wire. The event log often saves the swap.

Specifications and compatibility

Brand
OEM
Model
DSE 501 K
Dimensions
80 x 80 x 150 mm
Weight
0.50 kg

How to verify before ordering

  • The reference must match the installed module. Identical size does not mean identical wiring: input map and transfer logic change between versions.
  • Confirm the supply voltage (12 V or 24 V) and the number of inputs and outputs your panel actually uses.
  • If the panel has an expansion module or remote communication, check that the new controller supports the same protocol.
  • The reference shown on this listing is DSE 501 K; cross-check it against the one stamped on the removed part.

Frequently asked questions

Can it be installed without reprogramming?

No. Every new controller needs configuration: rated voltage, frequency, crank and cooldown timers, and transfer logic. We ship the factory configuration; site parameters are set on commissioning.

Does the controller include the display?

Where module and screen are one piece, yes. If your panel uses a separate display, check the full reference before ordering, because they are sold separately.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Model DSE 501 K
Brand OEM
Dimensions 80 x 80 x 150 mm
Weight 0,50 kg