Fuel Pump Assembly - MTU X00035411 is part of the fuel circuit: it delivers the flow and pressure the engine needs at each speed.
Any work on the injection circuit demands absolute cleanliness. A 5-micron particle in the high-pressure line damages the needle seat. Change the filter as well and purge the air before signing off.
Specifications and compatibility
- Model
- X00035411
- Engine model
- MTU 18V2000
- Applicable to
- MTU
How to verify before ordering
- Match the exact injector or pump reference; flow rates differ by code, not by appearance.
- Confirm the system type (inline, rotary or common rail) and the working pressure.
- Always fit the new sealing washers and O-rings supplied with the component.
- The reference shown on this listing is X00035411; cross-check it against the one stamped on the removed part.
Frequently asked questions
Can injectors be cleaned instead of replaced?
If the problem is dirt and not wear, ultrasonic cleaning on a test bench restores flow. If needle or seat are damaged, no cleaning will fix it.
Why does the engine smoke black after an injector change?
Wrong calibration or air in the line. Verify bench calibration and purge the circuit before blaming anything else.
Related parts
- Engine parts - MTU X00034186
- Engine Parts - MTU Flexible Coupling X00005812
- Actuator - MTU Drive Actuator 5360910625
- Engine Parts - MTU Assembly 5360781468
- Engine parts - MTU 5369910041
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Engine Model | MTU 18V2000 |
| Model | X00035411 |
| Applicable To | MTU |
