AVR - Automatic Voltage Regulator EVC300I
The AVR EC300i Engga is a thyristor-based automatic voltage regulator designed to control the DC exciter field power in conventional brushless generators of 50 or 60 Hz. This AVR features circuits that incorporate protection against low speed and overload. Excitation power is obtained directly from the generator terminals, ensuring efficient and safe operation.
AVR - EVC300I belongs to the generator excitation circuit and holds the output voltage within about ±1 % when the load steps up or down.
AVR wear is thermal. It works inside the generator compartment with no ventilation of its own, so it is usually the first module to age on a high-hour set. Keeping one on the shelf avoids a multi-day stop for a low-cost part.
Specifications and compatibility
- Applicable to
- ENGGA
- Dimensions
- 17 x 6 x 13 cm
- Weight
- 1.00 kg
How to verify before ordering
- Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
- Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
- Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.
Frequently asked questions
How do I know the fault is the AVR and not the generator?
Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.
Can the voltage be trimmed after installation?
Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.
Related parts
- AVR - Automatic Voltage Regulator BE2000E
- Carbon brush - Volvo Penta 14594565 (BR28 N1)
- AVR - Automatic Voltage Regulator KT245-1B/10K110/SK3P220
- AVR - Automatic Voltage Regulator R230
- AVR - Automatic Voltage Regulator SE350
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Model | EVC300I |
| Applicable To | ENGGA |
| Weight | 1,00 kg |
| Dimensions | 17 x 6 x 13 cm |
| Spare Parts | |
|---|---|
| Generator Parts | AVR |
